Inhaltsverzeichnis   MOBOTIX Online-Hilfe

Managing User Groups and Access Rights

The Group Access Control Lists dialog allows managing the camera's user groups that are assigned in the Users and Passwords dialog.

The Public Access row makes the corresponding screens and functions publicly available, i.e. accessing them does not require a user name and password. If a checkbox in this row is activated, editing the group access rights below is not possible. If you would like to set individual access rights for certain screens or functions, you need to deactivate the checkbox in this row, then set the access rights for the individual groups.

The following rules apply for group names and passwords:

Notes:


Creating New Groups

By default, new groups are created without any access rights. If the desired checkboxes are not accessible (gray), deactivate the corresponding checkbox in the Public Access row at the top of the dialog.

When activating a Screen, the software will set the required minimum access rights in the Function section automatically. These checkboxes will remain checked even if the screen has been deactivated for this particular group; they have to be removed one by one, if required.

Deleting Groups

Activate the Remove Group option behind the group(s) you would like to delete and click on Set at the bottom of the dialog.

Once you have finished configuring the groups, you should always store the settings in the camera's permanent memory. If the configuration is not stored in the camera's permanent memory, all deleted groups will again be valid after the next camera reboot!

If a group has been deleted, all users assigned to the deleted group in the Users and Passwords dialog will be assigned to the undefined group.

The admins group cannot be deleted. Users of this group always have access to the administration menu.

Setting the Access Rights

The access rights are split into three sections:

Screen/View

Access to the camera screens in this section can be set individually for every group.

In order to ensure that the minimum access rights are granted, the corresponding access rights in the Function section will be granted automatically when activating a certain screen (even if the checkboxes are gray as they are publicly accessible). When deactivating a screen or view, these access rights will remain checked and have to be unchecked one by one. For additional information on this topic, see the Minimum Access Rights section.

Access Right Description
Guest

The Guest screen allows viewing the camera's live image, setting the frame rate within the preset limits and accessing the Live screen by clicking on the Menu link at the bottom of the page.

See also: The Guest Screen
Live

The Live screen of the MOBOTIX camera displays the current images of the camera.

Use the dropdown menus to access certain functions of the image controls and the camera administration or open the Setup Menu to see links to all image and event control dialogs.

The Admin Menu contains all dialogs for configuring the camera.

Player

Use the Player screen to view and download the events stored in the internal or the external image storage of the camera.

See also: The Player Screen
MultiView

Use the MultiView screen to combine several cameras in different patterns and to assign special functions (highlighting, focus on alarm, ...) for the individual cameras.

See also: The MultiView Screen
PDA

The PDA screen displays the camera's current image for low-resolution devices (PDAs/MDAs and mobile phones).

If you would like to see a list of events on your PDA and download event images, open the PDA Event List.

See also: The PDA Screen
MxCC

This rights controls the access using MxControlCenter.

See also: The MxControlCenter

Function

The access rights in this section are required by the different Screens/Views for proper operation, but can be removed one by one, if required.

Access Right Description
Info

The Info function of the MOBOTIX camera provides access to the Camera Status dialog showing various information on the camera (model, version, software version, network configuration, ...).

Guest Image

This function is required to see the live image of the Guest screen (see above) of the MOBOTIX camera. It shows the current live image with a reduced frame rate.

Live Image

This function is required to see the live image of the Live screen (see above) of the MOBOTIX camera. It shows the current live image with maximum frame rate.

Image Link

This function allows getting images from the MOBOTIX camera's CGI interface that delivers different images.

See also: CGI Parameters of the MOBOTIX Camera
Events

The Player, MultiView and PDA screens require this function for displaying the stored event images.

See also: The Player Screen
The MultiView Screen
The PDA Screen
API (QC, SB)

This function allows accessing the camera's HTTP API interface, which allows remote-controlling the camera. This interface is also used by the Quick Controls (pulldown lists above the live image) and the softbuttons of the different screens.

See also: The HTTP API

Current Configuration

The access rights in this section provide access to different configuration sections of the MOBOTIX camera.

Access Right Description
Admin

This rights grants access to the Admin menu of the MOBOTIX camera and all of its configuration dialogs (network parameters, event storage on file servers, transmission profiles, audio and phone settings, ...).

See also: Administration Menu section in the Table of Contents.
Image Setup

This rights grants access to the image control dialogs of the MOBOTIX camera's Setup menu.

See also: Setup Menu > Image Control section in the Table of Contents.
Event Settings

This rights grants access to the event control dialogs of the MOBOTIX camera's Setup menu.

See also: Setup Menu > Event Control section in the Table of Contents.

Minimum Access Rights

Specific screens require certain Functions for proper operation. For example, the Guest screen requires the Guest Image function, the Live screen requires the Live Image function (see Function table).

To facilitate setting access rights, all required functions of a screen will be set automatically if a certain screen is being activated for a group (the required Function checkboxes are activated automatically). The access rights added automatically comprise all required functions for a screen to work properly.

Once set, the checkboxes can be deactivated again manually. One group may thus have access to the Live screen, using the functions controlled by API (QC, SB) is not allowed. Likewise, it is possible to grant access to the Guest screen for a group using the Guest Image function and also allow accessing the Camera Status dialog (Info function).

Setting Public Access

The checkboxes of the Public Access row grant public access to camera screens, functions and configuration sections, i.e. you will not need a user name or password to access these areas of the camera. An exception is the Admin configuration section, which cannot be opened for public access.

If you would like to set individual access rights for certain screens or functions, you need to deactivate the checkbox in the Public Access row, then set the access rights for the individual groups.

Protecting a Camera From Public Access

To prevent the camera from unauthorized access, you should execute the following steps:

  1. It is recommended to start by resetting all users, passwords and group definitions to the Factory default settings.
    Caution! This will also reset the admin user's password to meinsm (Users and Passwords dialog)!
  2. Deactivate all checkboxes of the Public Access row.
  3. Create the required user groups in this dialog and the users in the Users and Passwords dialog.
  4. Make sure that you change the password for the admin user!

Scheduled Access Control (Supervisor)

In order to restrict access to a camera to a specific user group or control organs in highly regulated work environments, you can open the Scheduled Access Control dialog. For additional information on this topic, see the Scheduled Access Control by the "Supervisor" help page.


Konfiguration sichern

Klicken Sie auf Setzen, um die Einstellungen zu aktivieren und bis zum nächsten Neustart der Kamera zu sichern.

Beenden Sie den Dialog durch Klick auf Schließen. Hierbei wird geprüft, ob Änderungen der Gesamtkonfiguration vorliegen. Ist dies der Fall, werden Sie gefragt, ob die Gesamtkonfiguration dauerhaft gesichert werden soll.

de, en

© 2001-2024 MOBOTIX AG, Germany · http://www.mobotix.com/